Support pour iPad

A: The wall bracket itself is a permanent installation, but the iPad releases instantly. Our mechanical clamping system allows you to pop the device out in one second for a reboot, software update, or device swap, then snap it back into the locked position. If you need a fully removable setup with no wall damage, our adhesive models can be detached cleanly from smooth surfaces.

Yes. All OHLPRO drill-base and adhesive mounts feature an adjustable clamping system that accommodates devices from 4.7" to 13", including iPads fitted with thick protective cases. The clamp width supports a total device-plus-case thickness of up to 2 cm (approximately 0.79 inches), which covers virtually all standard and heavy-duty iPad cases on the market. For our magnetic models, attach the included metal plate to the back of your case to enable the snap-on connection.

A: Yes. Our universal adjustable mounts are compatible with every current iPad model — iPad Pro 11" and 13", iPad Air, iPad, and iPad mini — with or without a case. The open-architecture clamp adjusts to fit any device between 4.7" to 13", so future iPad upgrades require no new hardware.

A: Yes. For tile surfaces, use a diamond-tipped drill bit and masonry anchors — standard bits will crack ceramic. Our anodized aluminum mounts are built to withstand kitchen conditions including grease, steam, and chemical degreasers without pitting or corroding. If you prefer a no-drill option, our 3M VHB adhesive models bond securely to smooth, clean tile and can hold without any wall damage.

A: Use 1/4-inch heavy-duty steel toggle bolts for hollow drywall — they deliver over 50 lbs of shear strength, which handles the constant micro-vibrations of daily tapping and swiping without loosening over time. If your target spot lands on a wooden stud, two 2-inch wood screws directly into the timber are even better. Position the center of the mount at 58–60 inches from the floor for the best viewing angle for most users. For a complete step-by-step walkthrough including anchor selection and placement tips, see our iPad wall mount installation guide: YOUR-BLOG-URL

A: The professional standard is Power over Ethernet (PoE). Run a Cat6 cable from your network rack to a recessed gang box behind the mount, then use a PoE-to-USB-C adapter inside the box to deliver clean 5V/9V power to the iPad — completely hidden, no exposed wiring. This is also the only method that is fully NEC-compliant: routing a standard USB cable through a wall cavity is a building code violation, as retail cables are not fire-rated for in-wall use. For the full wiring workflow and code requirements, read our guide on hidden power for iPad wall mounts: YOUR-BLOG-URL

A: No. Our magnetic mounts use N52 neodymium magnets that are safe for all modern Apple devices. The magnetic field strength is not sufficient to interfere with your iPad's internal components, storage, or Apple Pencil pairing. For non-MagSafe devices, simply attach the included ultra-thin metal plate to the back of your case — it adds no meaningful bulk and does not affect wireless charging.

A: Keeping a lithium-ion battery pinned at 100% charge causes it to overheat and physically expand — eventually pushing the screen out of the chassis. The solution is a Wi-Fi smart plug combined with a charging automation that cycles the device between 20% and 80% battery. Home Assistant users can automate this through the iOS integration; Apple Shortcuts users can build a personal automation tied to battery percentage. This simple setup can extend your iPad's lifespan significantly. Full setup instructions for both platforms are in our iPad wall mount battery management guide: YOUR-BLOG-URL

No. Our high-quality magnets are designed to be safe for modern electronics and will not interfere with your iPad's internal components or Apple Pencil.

Our magnetic mounts work best with MagSafe-compatible cases or by using the included ultra-thin metal plate on the back of your standard case.

We offer both permanent screw-in options for maximum security and high-strength adhesive options that can be removed without damaging your walls.

Yes, absolutely. Our premium wall mount for iPad Pro is engineered with an industrial-grade sturdy structure, ensuring even the heaviest iPad Pro models stay securely locked on the iPad arm wall mount without shaking or slipping.